Technical parameters

Medium temperature: -20℃~+180℃

Ambient temperature: -20 ° C to +60 ° C

Nominal pressure: 1.6mpa

Control gas: neutral gas, air

Air source pressure: 0.3~ 0.8mpa

Specification: DN15 - DN80

Body material: CF8 CF8M

Seat material: PTFE

Stem material: 304/316L

Sealing ring material: NBR

Applicable medium: water, steam, oil, neutral gas

Small cylinder Angle seat valve single role and double role; Single acting (pneumatic head is usually a hole); Working principle; According to the spring reset to open and close, divided into normally open and normally closed type. Double action (pneumatic head is usually two holes); Working principle: air control its switch. Large flow, small flow resistance, no water hammer.

Y-type design, expand the flow section of the valve chamber, make the fluid in the valve chamber more smooth, increase the flow rate by 30%.

1, Visual position indication: limit switch or emergency manual device can be connected.

2, easy installation: air control head can be 360 'rotation, even limit switch can also be 360' rotation. One or two limit switches can be easily installed.

3, advanced pneumatic controller: stainless steel shell, safe and reliable. Low wear piston structure, large capacity and low gas consumption. Internal components self lubrication, maintenance free.

4, Smaller pneumatic actuators are required: when the fluid flows in from above the stem, the head is made.

5, long life guide rod: stem deed teflon (PTEE) seal, avoid dirt import. Self lubrication, maintenance free. Stem is specially treated to ensure optimum retention and automatically corrects position.

6, no water hammer effect: fluid flow from the bottom of the valve stem, water hammer (water impact) is absorbed.

7, advanced valve body mechanism: flow rate is 30% larger than the ordinary Angle seat, smaller volume, better fluid flow pattern. Stainless steel 316 body, teflon seal, high temperature and corrosion resistant. It lives up to seven million times